-
INSULATOR
- Devices installed between conductors with different potentials or between conductors and grounding components that can withstand voltage and mechanical stress. Insulators are of various types and shapes.
INSULATORDevices installed between conductors with different potentials or between conductors and grounding components that can withstand voltage and mechanical stress. Insulators are of various types and shapes.
- Composite Suspension/Tension Insulator
- Composite Pin Insulator
- Composite Post Insulator
- Composite Line Post Insulator
- 52 Series Ball Socket Clevis Tongue Type
- 55 Series LV MV Type
- Pin Type Insulator
- 54 Series
- 53 series Spool Insulator
- 57 Series Tie Top Type
- Glass Disc Suspension Insulator
- Aluminum Binding Wire
- Spindle
- D iron
- Secondary Rack
-
SURGE ARRESTER
- MOA ceramic or polymer shell is applicable to power generation, transmission, power conversion, and distribution of AC 220kV and below. They are mainly used to maintain the amplitude voltage of lightning impulse and the specified level of switching impulse withstand voltage.
SURGE ARRESTERMOA ceramic or polymer shell is applicable to power generation, transmission, power conversion, and distribution of AC 220kV and below. They are mainly used to maintain the amplitude voltage of lightning impulse and the specified level of switching impulse withstand voltage.
-
FUSE CUTOUT
- High voltage protection device for outdoor use of drop fuse circuit breaker and load switch fuse circuit breaker. The incoming line to be connected to the distribution transformer or distribution line mainly protects the transformer or line from short circuit and overload, as well as switching on/off the load current.
FUSE CUTOUTHigh voltage protection device for outdoor use of drop fuse circuit breaker and load switch fuse circuit breaker. The incoming line to be connected to the distribution transformer or distribution line mainly protects the transformer or line from short circuit and overload, as well as switching on/off the load current.
-
POLE MOUNTED SWITCH
- Zw32 series outdoor high-voltage vacuum circuit breakers are used for AC 50HZ, 12-36KV three-phase power supply system on/off load current, with overload protection function to meet the control and measurement requirements of short circuit to achieve remote control and monitoring and other functions to control distribution, industrial enterprises and frequently switch rural networks.
POLE MOUNTED SWITCHZw32 series outdoor high-voltage vacuum circuit breakers are used for AC 50HZ, 12-36KV three-phase power supply system on/off load current, with overload protection function to meet the control and measurement requirements of short circuit to achieve remote control and monitoring and other functions to control distribution, industrial enterprises and frequently switch rural networks.
-
SUBSTATION SWITCH
- Substation is to assemble some equipment to cut off or connect, change or adjust the voltage. In the power system, Substation is the gathering point of power transmission and distribution. The substation is mainly composed of feeder (incoming line, outgoing line) and bus, disconnector, grounding switch, circuit breaker, power transformer (main transformer), station transformer, voltage transformer TV (PT), current transformer TA (CT) pin.
SUBSTATION SWITCHSubstation is to assemble some equipment to cut off or connect, change or adjust the voltage. In the power system, Substation is the gathering point of power transmission and distribution. The substation is mainly composed of feeder (incoming line, outgoing line) and bus, disconnector, grounding switch, circuit breaker, power transformer (main transformer), station transformer, voltage transformer TV (PT), current transformer TA (CT) pin.
- ZW7-36 Series Outdoor HV Vacuum Circuit Breaker
- LW8-36 Series Outdoor HV SF6 Circuit Breaker
- LW36-72.5 Series Outdoor HV SF6 Circuit Breaker
- LW36-126(145)Series Outdoor HV SF6 Circuit Breaker
- GW4 Series Centre-break Two Post Disconnector
- GW38 Series Double-break Three Post Disconnector
- GW5 Series V-type Centre Breaker Disconnector
- JW Series Earthing Switch
-
HIGH VOLTAGE SWITCHGEAR
- The high voltage switch tester can be used to test and measure the mechanical characteristics of high voltage switches in power systems such as vacuum, sulfur hexafluoride, less oil, more oil, etc. With stable measurement data, convenient wiring and simple operation, it is a convenient tool for high-voltage switch maintenance and test.
HIGH VOLTAGE SWITCHGEARThe high voltage switch tester can be used to test and measure the mechanical characteristics of high voltage switches in power systems such as vacuum, sulfur hexafluoride, less oil, more oil, etc. With stable measurement data, convenient wiring and simple operation, it is a convenient tool for high-voltage switch maintenance and test.
-
LOW VOLTAGE SWITCHGEAR
- The circuit breaker has the following protective devices for overload, short circuit and undervoltage, which can protect the circuit and power supply equipment from damage. MCCBs can be divided into C type (basic type), L type (standard type) and C type (standard) according to their rated ultimate short-circuit breaking capacity. MCCB has the characteristics of small size, strong breaking capacity, high voltage, short arc and vibration resistance. This is the ideal product for land and ship.
LOW VOLTAGE SWITCHGEARThe circuit breaker has the following protective devices for overload, short circuit and undervoltage, which can protect the circuit and power supply equipment from damage. MCCBs can be divided into C type (basic type), L type (standard type) and C type (standard) according to their rated ultimate short-circuit breaking capacity. MCCB has the characteristics of small size, strong breaking capacity, high voltage, short arc and vibration resistance. This is the ideal product for land and ship.
- MNS Low Voltage Withdrawable Switchgear
- GCS Low Voltage Withdrawable Switchgear
- GCK Low Voltage Withdrawable Switchgear
- GGD Low Voltage Fixed Type Switchgear
- GWB Low Voltage Reactive Power Compensation Device
- LV Distribution Board
- Ready Board
- Meter Box
- MCCB外壳
- MCCB Enclosure
- Mini Circuit Breaker(MCB)
-
MV FITTINGS
- The suspension clamp is mainly used for overhead power lines or substations. The conductor and lightning wire are suspended on the insulator string or the lightning wire is suspended on the tower through connectors. The hardware is made of horse iron and aluminum alloy.
MV FITTINGSThe suspension clamp is mainly used for overhead power lines or substations. The conductor and lightning wire are suspended on the insulator string or the lightning wire is suspended on the tower through connectors. The hardware is made of horse iron and aluminum alloy.
- Q-U Ball Eye
- WS Socket Eye
- WSY Socket Clevis
- U Anchor Shackles
- U-Bolts
- Z Link Plate
- PS Clevise
- PD Link Clevis
- P Extension Link Clevis
- D Shackles
- Ball-ended Hook and pig tail hook
- Tension Clamp
- Suspension Clamp
- Preformed dead end clamp
- APG PG Clamp
- JBT PG Clamp
- Aluminium PG Clamp
- DL Aluminium Lug
- DTL Bimetal Lug
- Bolt type torque Lug
- JY Cable Joint
- JBE Repair Sleeves For ACSR Conductor
- SC Tinned Copper Lug
- GL-G Aluminium Connecting Pipe(Passing Though)
- GL-G Aluminium Connecting Pipe(Passing Though)
-
LV FITTINGS
- JNS series four core bunched cable tension clamp series is completely used to fix or fasten bunched cables at both ends of 1kV and below overhead four (two) core cable circuits.
LV FITTINGSJNS series four core bunched cable tension clamp series is completely used to fix or fasten bunched cables at both ends of 1kV and below overhead four (two) core cable circuits.
- Product type and application scope
- MJPB Pre-insulated sleeve
- Anchoring Bracket
- Anchoring clamp
- NEJ Wedge strain clamps for insulation cable
- JNS Four(two)-core bunched cable strain clamp series
- Suspension clamp
- Fixing Nail
- Type 304 Stainless Steel Band
- Ftth optical cable clamp
- Ftth optical cable clamp
-
POLE FITTINGS
- The function of the cross arm tie is the same as that of the cross arm brace and angle brace, except that the cross arm tie is connected to the electrical cross arm through bolts and nuts with different structures. They have the function of supporting the electrical cross arm, the pole cross arm. Usually used in pairs
POLE FITTINGSThe function of the cross arm tie is the same as that of the cross arm brace and angle brace, except that the cross arm tie is connected to the electrical cross arm through bolts and nuts with different structures. They have the function of supporting the electrical cross arm, the pole cross arm. Usually used in pairs
-
STAY FITTINGS
- The stay wire fittings refer to the fittings used to connect, fix and adjust the stay wire from the tower to the ground anchor. The stay wire material is galvanized steel strand, and the stay wire fittings include wedge clamp, UT clamp, coupling plate for double stay wire and other fittings.
STAY FITTINGSThe stay wire fittings refer to the fittings used to connect, fix and adjust the stay wire from the tower to the ground anchor. The stay wire material is galvanized steel strand, and the stay wire fittings include wedge clamp, UT clamp, coupling plate for double stay wire and other fittings.
-
EARTHING MATERIALS
- The function of grounding is mainly to prevent people from electric shock, equipment and lines, damage, fire and lightning, static damage and normal operation of power system. Grounding is to ensure normal operation of electrical equipment and personal safety It is a safety measure for electricity use, which is realized through the connection of metal wires and grounding devices. The common ones are protective grounding, working grounding, lightning protection grounding, shielding grounding, anti-static grounding, etc.
EARTHING MATERIALSThe function of grounding is mainly to prevent people from electric shock, equipment and lines, damage, fire and lightning, static damage and normal operation of power system. Grounding is to ensure normal operation of electrical equipment and personal safety It is a safety measure for electricity use, which is realized through the connection of metal wires and grounding devices. The common ones are protective grounding, working grounding, lightning protection grounding, shielding grounding, anti-static grounding, etc.
-
CABLE TERMINAL AND JOINTS
- Cable joint is also called cable head. After the cable is laid, in order to make it a continuous line, each segment of the line must be connected as a whole, and these connection points are called cable joints. The cable joint in the middle of the cable route is called the intermediate joint, while the cable joint at both ends of the route is called the terminal. The cable joint is used to lock and fix the incoming and outgoing lines, playing a role of waterproof, dust-proof and shock proof.
CABLE TERMINAL AND JOINTSCable joint is also called cable head. After the cable is laid, in order to make it a continuous line, each segment of the line must be connected as a whole, and these connection points are called cable joints. The cable joint in the middle of the cable route is called the intermediate joint, while the cable joint at both ends of the route is called the terminal. The cable joint is used to lock and fix the incoming and outgoing lines, playing a role of waterproof, dust-proof and shock proof.
-
TOOLS
- The safety rope is woven with synthetic fiber. It is an auxiliary rope used to connect the safety belt. Its function is to double protect and ensure safety. Generally, the length is 2 meters, and there are also 2.5 meters, 3 meters, 5 meters, 10 meters and 15 meters. The safety ropes above 5 meters can also be used as lifting ropes.
TOOLSThe safety rope is woven with synthetic fiber. It is an auxiliary rope used to connect the safety belt. Its function is to double protect and ensure safety. Generally, the length is 2 meters, and there are also 2.5 meters, 3 meters, 5 meters, 10 meters and 15 meters. The safety ropes above 5 meters can also be used as lifting ropes.
-
STREET LIGHT
- L&RGR are committed to the supremacy of technology and are durable without fear of comparison. The lamps are divided into pendant lamps, desk lamps, wall lamps, floor lamps, etc. It refers to the apparatus that can transmit light, distribute and change the light distribution of light source, including all parts and components required for fixing and protecting light source except light source, as well as circuit accessories necessary for connecting with power supply
STREET LIGHTL&RGR are committed to the supremacy of technology and are durable without fear of comparison. The lamps are divided into pendant lamps, desk lamps, wall lamps, floor lamps, etc. It refers to the apparatus that can transmit light, distribute and change the light distribution of light source, including all parts and components required for fixing and protecting light source except light source, as well as circuit accessories necessary for connecting with power supply